Register
The minimum effective width of the landing (or platform) at the top of the construction stairs is ______________. Option 1: 18 inches Option 2: 24 inches Option 3: 30 inches Option 4: 36 inches
36.4k views
2 votes
The minimum effective width of the landing (or platform) at the top of the construction stairs is ______________.

Option 1: 18 inches
Option 2: 24 inches
Option 3: 30 inches
Option 4: 36 inches

User Elfoc
by
7.0k points

1 Answer

3 votes

Final answer:

The minimum effective width of the landing at the top of construction stairs is 36 inches to ensure safety and accessibility.

Step-by-step explanation:

The minimum effective width of the landing (or platform) at the top of the construction stairs is 36 inches. It is essential that a landing be of sufficient width for safety and accessibility purposes. In most building codes, the standard minimum width of a landing is 36 inches. This allows enough space for a person to stand comfortably, maneuver and, if necessary, allows for the passage of equipment or other people without risk.

User Parseltongue
by
7.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!