Register
Pipe fittings used to connect 2 pieces of pipe the same size and in straight lines are called a. Elbows b. Bushings c. Return bends d. Couplings
22.5k views
3 votes
Pipe fittings used to connect 2 pieces of pipe the same size and in straight lines are called

a. Elbows
b. Bushings
c. Return bends
d. Couplings

User Inkredibl
by
7.6k points

1 Answer

3 votes

Final answer:

Couplings are the fittings used to connect two pieces of pipe of the same size in a straight line.

Step-by-step explanation:

The pipe fittings used to connect two pieces of pipe of the same size and in straight lines are called couplings. Couplings are used to join two pipes end-to-end that are of the same diameter, enabling fluids to flow without interruption. They are designed to connect straight sections of pipe for various applications within the chemical industry and beyond, ensuring a secure and continuous path for the conveyed materials.

User Jonathan Bravetti
by
9.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!