Question

LAY 40) What steps should be taken to minimize safety concerns with sagging Gypsum board ceilings and promote rapid drying? A. Drain, safely remove, and properly dispose B. Perforate to increase airflow while drying C. Drain properly dry the gypsum and reinstall D. Support to prevent collapse while drying I​

Answer 1

To minimize safety concerns with sagging Gypsum board ceilings and promote rapid drying, steps such as providing support, safely removing and disposing damaged areas, perforating for increased airflow, or properly drying and reinstalling can be taken.

Therefore, all of the above given options are correct.

Step-by-step explanation:

To minimize safety concerns with sagging Gypsum board ceilings and promote rapid drying, the following steps should be taken:

1. Support to prevent collapse while drying: Use braces or supports to hold up the sagging area of the ceiling until it is dry and can be properly repaired.
2. Drain, safely remove, and properly dispose: If there is excessive water damage, remove the damaged sections of the Gypsum board ceiling and dispose of them properly.
3. Perforate to increase airflow while drying: Create small holes in the ceiling to increase airflow, which can help speed up the drying process.
4. Drain properly dry the gypsum and reinstall: If the ceiling is only mildly sagging and not severely damaged, you may be able to drain the excess moisture, allow the gypsum board to fully dry, and then reinstall it properly.