Register
The "rudder adjustment" control on an autopilot steering stand is used to __________. a) Change the rudder angle b) Adjust the autopilot sensitivity c) Engage emergency steering d) Override manual steering
143k views
1 vote
The "rudder adjustment" control on an autopilot steering stand is used to __________.

a) Change the rudder angle
b) Adjust the autopilot sensitivity
c) Engage emergency steering
d) Override manual steering

User Ruediste
by
8.2k points

1 Answer

2 votes

Final answer:

The "rudder adjustment" control on an autopilot steering stand is used to change the rudder angle.

Step-by-step explanation:

The "rudder adjustment" control on an autopilot steering stand is used to change the rudder angle. This control is typically found on aircraft or marine autopilot systems and allows for precise adjustments to the rudder position. By changing the rudder angle, the autopilot can effectively steer the aircraft or vessel in the desired direction.

User Sdfadfaasd
by
8.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Where are all the controls on most circuits?
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!