Register
The best and fastest way to check for squareness on the door or drawer that is being glued together, is to A. Measure diagonals B. measures stiles C. use a try-square D. use the Pythagorean theorem
27.9k views
2 votes
The best and fastest way to check for squareness on the door or drawer that is being glued together, is to

A. Measure diagonals
B. measures stiles
C. use a try-square
D. use the Pythagorean theorem

User Heading
by
7.2k points

1 Answer

5 votes

Answer:

A. Measure diagonals

Step-by-step explanation:

The best and fastest way to check for squareness when gluing a door or drawer together is to measure the diagonals. If the diagonals are equal, the assembly is square. This method is a common and effective way to ensure that the corners are at right angles to each other.

User Kamuela Franco
by
8.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!