Final answer:
To address a non-booting system after adding new RAM, check proper installation, compatibility, clear CMOS, isolate the issue by trying to boot with individual RAM sticks, and observe for error messages. Defective or incompatible RAM could be the cause, and consulting manufacturer's specifications may be necessary.
Step-by-step explanation:
If the system does not boot after new random access memory (RAM) is added, there are several troubleshooting steps you can take:
- Check if the RAM is properly seated in its slot. Sometimes it might not be fully clicked in, which can cause the system not to boot.
- Ensure compatibility of the newly added RAM with your motherboard, including the RAM type (e.g., DDR4), speed, and voltage.
- Clear the motherboard's CMOS to reset the BIOS settings to default, which can sometimes resolve boot issues after hardware changes.
- Try booting with only the new RAM or with one RAM stick at a time to isolate the issue.
- Look for any error messages that could provide additional insight into the boot failure.
- If the system still does not boot, the new RAM may be defective or incompatible, and you may need to consult the manufacturer's specifications or consider returning the RAM.
Always handle RAM with care to avoid static damage and make sure your computer is powered off and unplugged before adding or removing RAM.