Question

If a suitable lenght of ethernet cable os not available in an equipment room and a 568B twitsted pair cable needs to be manually made, whicj of the following sequences should be used?

Answer 1

To make a 568B twisted pair Ethernet cable, the wires should be arranged in the following order: Orange/White, Orange, Green/White, Blue, Blue/White, Green, Brown/White, Brown. This sequence is standard for Ethernet cabling according to the T568B wiring scheme, and ensures a proper straight-through cable.

Step-by-step explanation:

If a suitable length of Ethernet cable is not available and a 568B twisted pair cable needs to be manually made, the correct sequence to be used is as follows:

1. Orange/White
2. Orange
3. Green/White
4. Blue
5. Blue/White
6. Green
7. Brown/White
8. Brown

This sequence is part of the T568B standard which is one of the two standards for Ethernet cabling and is the most widely used method for wiring Ethernet cables.

The sequence should be replicated on both ends of the cable to create a straight-through cable, which is typically used for connecting different types of devices.