Register
If you were traveling at 50 MPH, how many car lengths should you be behind the car in front of you? 1) 2 car lengths 2) 3 car lengths 3) 4 car lengths 4) 5 car lengths
72.0k views
4 votes
If you were traveling at 50 MPH, how many car lengths should you be behind the car in front of you?

1) 2 car lengths
2) 3 car lengths
3) 4 car lengths
4) 5 car lengths

User CustardBun
by
7.4k points

1 Answer

4 votes

Final answer:

When traveling at 50 MPH, it is recommended to keep a distance of about 7 car lengths.

Step-by-step explanation:

When traveling at 50 MPH, the recommended distance between cars is typically 2 seconds. This is equivalent to about 7 car lengths. However, the exact number of car lengths can vary based on factors such as weather conditions, traffic density, and individual driving styles.

It's important to maintain a safe following distance to allow for enough time to react and stop safely in case of sudden braking or other emergencies. Keeping a distance of several car lengths helps ensure a safe driving experience for everyone on the road.

User David Mohundro
by
7.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.6m questions

11.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!