Final answer:
To give internet access to a virtual machine in VMware, you can use networking modes such as NAT, Bridged, or Host-only. NAT allows the virtual machine to access the internet through the host's network connection. Bridged mode gives the virtual machine its own IP address on the same network as the host, allowing direct internet access. Host-only mode creates a private network between the host and virtual machines, but internet access depends on the host's connection.
Step-by-step explanation:
To give internet access to a virtual machine in VMware, you can use one of several networking modes. The most commonly used mode is NAT (Network Address Translation), which allows the virtual machine to access the internet through the host's network connection.
To configure NAT, you need to go to the virtual machine settings in VMware and select the NAT option under the Network Adapter settings. This will enable the virtual machine to obtain an IP address from the host's network and have internet access.
Another option is to use the Bridged mode, which allows the virtual machine to have its own IP address on the same network as the host. In this mode, the virtual machine behaves as a separate device on the network and can directly access the internet. To set up Bridged mode, you need to choose the Bridged option in the Network Adapter settings of the virtual machine.
Additionally, there is a Host-only mode that creates a private network between the host and the virtual machines. However, in this mode, the virtual machine can only access the internet if the host has a separate internet connection, such as a Wi-Fi or cellular connection.