Question

Implement using hardware/ discrete electronic components; by drawing the logic circuit diagram and also indicate the wiring of the busses of the following Assembly instructions of:

*MOV A, B and MOV B, A.-
*STA 2030-
*XCHG−
*ADD B, that sets the F register.

Answer 1

To implement the assembly instructions using hardware/discrete electronic components, you can use logic gates and other electronic components to create a logic circuit diagram.

Step-by-step explanation:

To implement the assembly instructions using hardware/discrete electronic components, you can use logic gates and other electronic components to create a logic circuit diagram. Here is a step-by-step explanation:

1. Mov A, B: Connect the output of register B to the input of register A using multiplexers. The control signal for the multiplexers should be set to select the input from register B.
2. Mov B, A: Connect the output of register A to the input of register B using multiplexers. The control signal for the multiplexers should be set to select the input from register A.
3. Sta 2030: Connect the output of register A to the memory address 2030 using a memory write circuit.
4. Xchg: Connect the outputs of register A and register B to each other using multiplexers. The control signal for the multiplexers should be set to exchange the inputs.
5. Add B: Connect the output of register B to an adder circuit. The carry out from the adder circuit should be connected to the F register.