Register
Which pin number are the selector pins in 74ls76 IC? A. Pin 1 and Pin 9 B. Pin 2 and Pin 11 C. Pin 4 and Pin 10 D. Pin 7 and Pin 12
218k views
5 votes
Which pin number are the selector pins in 74ls76 IC?

A. Pin 1 and Pin 9
B. Pin 2 and Pin 11
C. Pin 4 and Pin 10
D. Pin 7 and Pin 12

User Mobeen
by
7.1k points

1 Answer

1 vote

Final answer:

The selector pins in the 74LS76 IC are Pin 1 and Pin 9. Pin 1 is the Clear Pin and Pin 9 is the Clock Enable Pin.

Step-by-step explanation:

The selector pins in the 74LS76 IC are Pin 1 and Pin 9. These selector pins are used to set the desired mode of operation for the IC. Pin 1 is the Clear Pin, which is used to reset the flip-flop to its default state. Pin 9 is the Clock Enable Pin, which is used to enable or disable the clock signal.

User Steven Rosato
by
7.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.3m questions

10.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!