Register
Place the steps below in the correct order that they should be performed in order to determine where the point should be located to minimize the cost of the pipeline. a) Cost analysis of potential locations.
148k views
1 vote
Place the steps below in the correct order that they should be performed in order to determine where the point should be located to minimize the cost of the pipeline.

a) Cost analysis of potential locations.
b) Geotechnical survey of potential locations.
c) Environmental impact assessment.
d) Economic feasibility study.

User Jstevenco
by
7.9k points

1 Answer

2 votes

Final answer:

The steps should be performed in the following order: geotechnical survey, cost analysis, environmental impact assessment, economic feasibility study.

Step-by-step explanation:

  1. Geotechnical survey of potential locations
  2. Cost analysis of potential locations
  3. Environmental impact assessment
  4. Economic feasibility study

User Kwarrtz
by
7.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Link Copied!