Register
What are some malfunctions that occur with a revolver?
133k views
1 vote
What are some malfunctions that occur with a revolver?

User Silvano
by
7.4k points

1 Answer

6 votes

Final answer:

A revolver can experience malfunctions such as failure to fire, failure to extract, and cylinder jamming. Regular maintenance and cleaning can help prevent these issues.

Step-by-step explanation:

When a revolver malfunctions, it can experience several issues. Some common malfunctions include:

  1. Failure to fire: This occurs when the trigger is pulled, but the bullet does not discharge. It can be caused by issues with the ammunition, firing pin, or cylinder alignment.
  2. Failure to extract: This happens when the spent casing remains stuck in the cylinder after firing. It can be caused by dirty or damaged extractor rods or weak extractor springs.
  3. Cylinder jamming: This occurs when the cylinder does not rotate smoothly or gets stuck in place. It can be caused by debris, dirt, or improper lubrication.

These are just a few examples of malfunctions that can occur with a revolver. It is important to properly maintain and clean your revolver to minimize the risk of malfunctions.

User Pixelgrease
by
7.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.5m questions

11.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!