Final answer:
Provisioning a Cisco 7941 involves connecting the phone to a network, ensuring DHCP with TFTP information, placing the configuration file on the TFTP server, the phone downloading the configuration, updating the firmware if needed, and finally registering with the VoIP system. Manual access to phone settings might be required for troubleshooting.
Step-by-step explanation:
The steps to provision a Cisco 7941 IP phone involve a series of actions that configure the phone to connect to the network and interact with a VoIP system.
First and foremost, the network infrastructure must be in place, including a Voice VLAN, DHCP, and a TFTP server to serve the necessary configuration files to the phone.
Basic Steps for Provisioning:
Connect the Cisco 7941 to your network via Ethernet.
Ensure that the phone is assigned an IP address through DHCP. The DHCP server should also provide the option 150 or 66, pointing to the TFTP server.
Place the configuration file, specific to the phone's MAC address, onto the TFTP server.
The phone will contact the TFTP server and download the configuration file.
If necessary, update the firmware of the Cisco 7941 by including the firmware files on the TFTP server.
After the phone has downloaded its configuration and any firmware updates, it will restart, and register with the VoIP system (like Cisco Unified Communications Manager or a SIP server).
Throughout this process, you may need to access the Cisco 7941 settings to manually input information or troubleshoot issues. This is done by pressing the settings button on the phone and navigating through the menus.
Note: The exact configuration steps and file names may vary depending on your VoIP system and network setup.