Register
When performing a self-test on a programmed ride control system, what should be considered? 1) The system should be connected to a computer 2) The system should be turned on 3) The system should be disconnected
80.1k views
2 votes
When performing a self-test on a programmed ride control system, what should be considered? 1) The system should be connected to a computer 2) The system should be turned on 3) The system should be disconnected from any power source 4) The system should be checked for any error codes

User Pathogen
by
7.5k points

1 Answer

4 votes

Final answer:

When performing a self-test on a programmed ride control system, it is important to consider connecting the system to a computer, ensuring the system is turned on, and checking for any error codes.

Step-by-step explanation:

When performing a self-test on a programmed ride control system, several factors should be considered. First, the system should be connected to a computer to enable the diagnostic software to interact with the system. Additionally, the system should be turned on during the self-test process. Lastly, the system should be checked for any error codes which could indicate malfunctioning components or issues within the system.

Learn more about programmed ride control system

User Handkock
by
8.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Vitrification is a process of: a. Chemical reaction bonding of aggregate ceramic powder b. Cementing aggregate ceramic powder with a liquefied material c. Solid-state diffusion of aggregate ceramic powder
What claim do ghost hunters make about energy-detecting devices? They can determine how many spirits are in one location. They can produce sounds that may be confused with ghosts. They can sense the presence
Link Copied!