Register
There are 55 lamps in a 6.6 amp series circuit, each 6000 lumens, which has a voltage drop of 48.4 volts across each lamp. What is the total circuit voltage. Ignore line drop.
166k views
2 votes
There are 55 lamps in a 6.6 amp series circuit, each 6000 lumens, which has a voltage drop of 48.4 volts across each lamp. What is the total circuit voltage. Ignore line drop.

User Fleepp
by
8.2k points

1 Answer

6 votes

Final answer:

The total circuit voltage is 2,662 volts.

Step-by-step explanation:

The total circuit voltage can be found by multiplying the voltage drop across each lamp by the number of lamps in the circuit. In this case, the voltage drop across each lamp is 48.4 volts and there are 55 lamps in the circuit. Therefore, the total circuit voltage is 48.4 volts multiplied by 55, which equals 2,662 volts.

Learn more about Voltage in a series circuit

User Icycool
by
8.3k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!