Register

Which of these was an early marine vessel that used a petroleum-filled float chamber coupled with a physically separated pressure sphere for the passengers? a. jason b. trieste …

Which of these was an early marine vessel that used a petroleum-filled float chamber coupled with a physically separated pressure sphere for the passengers? a. jason b. trieste …
183k views
0 votes
Which of these was an early marine vessel that used a petroleum-filled float chamber coupled with a physically separated pressure sphere for the passengers?

a. jason
b. trieste
c. rovs
d. alvin

User Kasun Thilina
by
8.2k points

1 Answer

2 votes
Answer: Trieste was an early marine vessel with a petroleum-filled float chamber and a physically separated pressure sphere for the passengers.
User Xavier Nodet
by
8.5k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!