Register
Recent research has identified mold-surface textures that will either (a) inhibit a solidified steel from separating from the mold or (b) force it to stay in contact in continuous casting. What is the
180k views
24 votes
Recent research has identified mold-surface textures that will either (a) inhibit a solidified steel from separating from the mold or (b) force it to stay in contact in continuous casting. What is the advantage of a mold that maintains intimate contact with the steel

User CrazyTim
by
4.9k points

1 Answer

14 votes

Answer:

faster heat conduction

Step-by-step explanation:

The advantage of mold that maintains intimate contact with the material is that thermal contact resistance between the two is going to be reduced. That is, it would be lower.

Consequently, what would be happening would be heat getting conducted faster, this would then allow for higher traverse speeds or it could allow for the usage of shorter molds.

User Mixopteryx
by
5.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.8m questions

7.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Link Copied!