Register
Which option identifies the tool best to use in the following scenario? Theresa has just purchased a crib and needs to assemble it quickly. The crib came with instructions, but no tools, and she does not
224k views
15 votes
Which option identifies the tool best to use in the following scenario?

Theresa has just purchased a crib and needs to assemble it quickly. The crib came with instructions, but no tools, and she does not know what she needs. On all of the screws in her kit, there is a six-sided hole in the head.

an Allen wrench
a Phillips screwdriver
a flathead screwdriver
an adjustable crescent wrench

User Kubilay
by
4.9k points

1 Answer

11 votes

Answer: an Allen wrench

Step-by-step explanation:

Based on the information given in the question, the option that identifies the tool that will be the best to use in the following scenario is the Allen key.

The Allen key also refered to as the hex key is a simple tool that is used in driving both screws, bolts and also used in driving the screws that have hexagonal sockets that is, six sided hole in their heads.

User Rena
by
4.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.3m questions

6.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!