Register

Which part does NOT rotate when the engine is running and the clutch pedal is depressed? Question 4 options: A) Pressure plate B) Clutch disc C) Flywheel D) Pilot bearing

Which part does NOT rotate when the engine is running and the clutch pedal is depressed? Question 4 options: A) Pressure plate B) Clutch disc C) Flywheel D) Pilot bearing
152k views
0 votes
Which part does NOT rotate when the engine is running and the clutch pedal is depressed?

Question 4 options:

A)

Pressure plate

B)

Clutch disc

C)

Flywheel

D)

Pilot bearing

User Nikola Irinchev
by
8.2k points

1 Answer

3 votes

Answer: flywheel :D yw!

User Kathelyn
by
8.8k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A 200 g projectile is fired with a velocity of 900 m/s toward the center of a 15 kg wooden block which rests on a rough surface. If the projectile penetrates and emerges from the back at a velocity of
The pressure at any point in a static fluid depends only on the Select one a)- depth, surface pressure, and specific weight. b)- specific weight. c)- surface pressure and depth. d)- depth and container
A face milling operation is to be performed on cast iron. Tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches, f = 0.001 inch/tooth, and N = 250 RPM. Find: MRR,
A bar of 75 mm diameter is reduced to 73mm by a cutting tool while cutting orthogonally. If the mean length of the cut chip is 73.5 mm, find the cutting ratio. If the rake angle is 15 deg, what is the
Link Copied!