Register
Fluid power is a. The technology that deals with the generation, control, and transmission of power-using pressurized fluids b. muscle that moves industry. c. used to push, pull, regulate, or drive virtually
222k views
4 votes
Fluid power is a. The technology that deals with the generation, control, and transmission of power-using pressurized fluids b. muscle that moves industry. c. used to push, pull, regulate, or drive virtually all the machine of modern industry d. probably as old as civilization itself e. all of the above

User Yedapoda
by
5.9k points

1 Answer

3 votes

Answer: a) The technology that deals with the generation, control and transmission of power using pressurized fluids

Explanation: Fluid power is defined as the fluids which are under pressure and then are used for generation,control and transmit the power. Fluid power systems produces high forces as well as power in small amount . These systems usually tend to have better life if maintained properly. The force that are applied on this system can be monitored by gauges as well as meter.

User EnglishPete
by
5.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.6m questions

7.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!