Register
The efficiency of a transformer is mainly dependent on: a)- Core losses b)- Copper losses c)- Stray losses d)- Dielectric losses
57.5k views
0 votes
The efficiency of a transformer is mainly dependent on: a)- Core losses b)- Copper losses c)- Stray losses d)- Dielectric losses

User Trmaphi
by
5.9k points

1 Answer

3 votes

The efficiency of a transformer is mainly dependent on a)- Core losses

Hope this helps! :)

User Ansuman Bebarta
by
6.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.5m questions

8.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!