Question

How to unclog a kitchen sink with garbage disposal

Answer 1

A garbage disposal is a mechanism installed in a kitchen sink to grind food waste into small particles. To unclog a kitchen sink with a garbage disposal, you can use a plunger or a plumbing snake.

Step-by-step explanation:

The device shown in the question is called a garbage disposal. A garbage disposal is a mechanism that is installed in a kitchen sink to grind food waste into small particles that can easily flow through the drain pipes.

When you turn on the garbage disposal, the motor inside the unit spins a shredding plate that has rotating blades. As you push food waste down the sink, the blades chop it into small pieces, which are then flushed down the drain with water.

To unclog a kitchen sink with garbage disposal, you can follow these steps:

1. Turn off the garbage disposal and unplug it from the power source to ensure safety.
2. Use a plunger to try and remove any clogs by creating a seal around the drain and pumping up and down.
3. If the plunger doesn't work, you can try using a plumbing snake to manually remove the clog from the drain pipes.
4. Once the clog is cleared, plug the garbage disposal back in and turn it on to ensure the water flows smoothly through the drain.

Answer 2

Start by unplugging the garbage disposal. Never work on a drain where the garbage disposal has power.

Use a natural cleaner made from ¼ cup baking soda followed by ½ cup vinegar. Allow it to fizz in the drain for a few minutes before washing it out using very hot water from the faucet.

Allow water to run for a few minutes to clear the clog.

Repeat as necessary.

If the clog remains after using this procedure a few times, use a flashlight to peer into the drain. Sometimes you can see a foreign object in the drain – a bone or utensil. You can sometimes reach the item using a pair of tongs or a needle nose pliers.

Plug the garbage disposal back in, run water and turn it on.

If you still have a block, you can use a plunger to attempt to loosen the clog. If you have a dishwasher, it’s important to clamp the end of the dishwasher line where it enters the disposal to prevent the hose from popping off the disposal nozzle as you plunge the sink drain.

Place the plunger directly over the sink drain, so the plunger completely covers the drain. Add water to the sink, so the lip of the plunger is covered in water. Then vigorously plunge the drain for a minute.

Lift the plunger and check for water flow. If it remains clogged, you can repeat the process a few times to see if you can release the clog. If the clog dissipates, be sure to run hot water for a few minutes to carry away and built up residue.