Register
Backing under your trailer at an angle can: A. push the trailer sideways. B. keep the air lines from getting pinched. C. damage/break the landing gear. D. both A and C.
56.2k views
0 votes
Backing under your trailer at an angle can:

A. push the trailer sideways.
B. keep the air lines from getting pinched.
C. damage/break the landing gear.
D. both A and C.

User Adam Ramadhan
by
8.0k points

1 Answer

3 votes

Final answer:

D. both A and C. Backing under your trailer at an angle can push the trailer sideways and damage/break the landing gear.

Step-by-step explanation:

Backing under your trailer at an angle can:

  1. Push the trailer sideways: When backing under the trailer at an angle, the force exerted on the trailer can cause it to move sideways. This can result in the trailer being misaligned or jackknifed.
  2. Damage/break the landing gear: If the angle is too steep or if the trailer is not properly aligned, it can put excessive pressure on the landing gear, potentially causing damage or breakage.

Therefore, the correct answer is D. both A and C.

User GendoIkari
by
9.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Link Copied!